How to store WPS outputs in Geoserver

You can store your WPS process outputs directly in Geoserver using the RESTful interface. Raster and vector data can be stored and made available as WFS, WMS or WCS layer.

Storing raster or vector data in a WMS layer

First, you will have to configure the Geoserver WMS generator. You can do this via the Admin Console:

admin_console_wms_generator.png

or directly in the wps_config.xml:

<Generator name="WMSGenerator"
 className="org.n52.wps.io.datahandler.generator.GeoserverWMSGenerator"
 active="true">
 <Format mimetype="application/WMS" />
 <Property name="Geoserver_username" active="true">admin</Property>
 <Property name="Geoserver_password" active="true">password</Property>
 <Property name="Geoserver_host" active="true">localhost</Property>
 <Property name="Geoserver_port" active="true">8181</Property>
 </Generator>

The following are the supported data bindings of the Geoserver WMS generator:
!GTRasterDataBinding.class
!ShapefileBinding.class
!GeotiffBinding.class
!GTVectorDataBinding.class

If you create a new process, make sure one of these binding is supported as output.The mime type "application/WMS" should appear in the ProcessDescription after you activated the generator.

Storing raster data in a WCS layer

First, you will have to configure the Geoserver WCS generator. You can do this via the Admin Console (see WMS generator),or directly in the wps_config.xml:
<Generator name="WCSGenerator"
 className="org.n52.wps.io.datahandler.generator.GeoserverWCSGenerator"
 active="true">
 <Format mimetype="application/WCS" />
 <Property name="Geoserver_username" active="true">admin</Property>
 <Property name="Geoserver_password" active="true">password</Property>
 <Property name="Geoserver_host" active="true">localhost</Property>
 <Property name="Geoserver_port" active="true">8181</Property>
 </Generator>

The following are the supported data bindings of the Geoserver WCS generator:
!GTRasterDataBinding.class
!GeotiffBinding.class

If you create a new process, make sure one of these binding is supported as output.The mime type "application/WCS" should appear in the ProcessDescription after you activated the generator.

Storing vector data in a WFS layer

First, you will have to configure the Geoserver WFS generator. You can do this via the Admin Console (see WMS generator),or directly in the wps_config.xml:
<Generator name="WFSGenerator"
 className="org.n52.wps.io.datahandler.generator.GeoserverWFSGenerator"
 active="true">
 <Format mimetype="application/WFS" />
 <Property name="Geoserver_username" active="true">admin</Property>
 <Property name="Geoserver_password" active="true">password</Property>
 <Property name="Geoserver_host" active="true">localhost</Property>
 <Property name="Geoserver_port" active="true">8181</Property>
 </Generator>

The following are the supported data bindings of the Geoserver WCS generator:
!GTVectorDataBinding.class

If you create a new process, make sure this binding is supported as output.The mime type "application/WFS" should appear in the ProcessDescription after you activated the generator.

Configuring output storing in Geoserver in the ExecuteRequest

In order to store the process output in a Geoserver instance, the ResponseForm element of the ExecuteRequest must look like the following (similar for WMS and WCS):
<wps:ResponseForm> 
<wps:ResponseDocument> 
<wps:Output mimeType="application/WFS"> 
<ows:Identifier>result</ows:Identifier> 
<ows:Title>result</ows:Title> 
<ows:Abstract>result</ows:Abstract> 
</wps:Output> 
</wps:ResponseDocument> 
</wps:ResponseForm> 
</wps:Execute>

If you are using the Client API, the following lines will create an ExecuteRequest accordingly:
ExecuteRequestBuilder executeBuilder = new org.n52.wps.client.ExecuteRequestBuilder(
 processDescription);

executeBuilder.setMimeTypeForOutput("application/WFS", process_output);

In the following you can see a ResponseDocument, where the layer name (ResourceID) and the WFS GetCapabilities link is stated:
<?xml version="1.0" encoding="UTF-8"?>
<ns:ExecuteResponse xmlns:ns="http://www.opengis.net/wps/1.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.opengis.net/wps/1.0.0 
http://schemas.opengis.net/wps/1.0.0/wpsExecute_response.xsd" serviceInstance="http://localhost:8080/wps/WebProcessingService?REQUEST=GetCapabilities&SERVICE=WPS" xml:lang="en-US" service="WPS" version="1.0.0">
   <ns:Process ns:processVersion="1.1.0">
      <ns1:Identifier xmlns:ns1="http://www.opengis.net/ows/1.1">org.n52.wps.server.algorithm.SimpleBufferAlgorithm</ns1:Identifier>
      <ns1:Title xmlns:ns1="http://www.opengis.net/ows/1.1">org.n52.wps.server.algorithm.SimpleBufferAlgorithm</ns1:Title>
   </ns:Process>
   <ns:Status creationTime="2013-06-12T11:27:22.606+02:00">
      <ns:ProcessSucceeded>Process successful</ns:ProcessSucceeded>
   </ns:Status>
   <ns:ProcessOutputs>
      <ns:Output>
         <ns1:Identifier xmlns:ns1="http://www.opengis.net/ows/1.1">result</ns1:Identifier>
         <ns1:Title xmlns:ns1="http://www.opengis.net/ows/1.1">result</ns1:Title>
         <ns:Data>
            <ns:ComplexData mimeType="application/WFS"><![CDATA[<?xml version="1.0" encoding="UTF-8"?><OWSResponse type="WFS"><ResourceID>N52:Shape_73e0415e-e973-4ee9-a070-9b0e42222a3b3859765591135812303</ResourceID>
<GetCapabilitiesLink>http://geoprocessing.demo.52north.org:8080/geoserver/wfs?Service=WFS&Request=GetCapabilities&Version=1.1.0</GetCapabilitiesLink></OWSResponse>]]></ns:ComplexData>
         </ns:Data>
      </ns:Output>
   </ns:ProcessOutputs>
</ns:ExecuteResponse> 

The follwing image shows an example WPS output as WFS layer (OpenLayers-style):

wps_output_as_geoserver_wfs_layer.png

This is the respective link.

I Attachment Action Size Date Who Comment
20061023wpsgeoserver.zipzip 20061023wpsgeoserver.zip manage 6 MB 23 Oct 2006 - 13:16 UnknownUser WPS geoserver integration binaries.
Picture1.pngpng Picture1.png manage 8 K 20 Oct 2006 - 18:22 UnknownUser Service architecture for integration of geoserver and 52n WPS
admin_console_wms_generator.pngpng admin_console_wms_generator.png manage 33 K 14 Jun 2013 - 07:36 BenjaminPross  
prototype_mapbuilderWPS.gifgif prototype_mapbuilderWPS.gif manage 35 K 23 Oct 2006 - 12:08 UnknownUser Mapbuilder prototype with processed data....
sequence.pngpng sequence.png manage 7 K 23 Oct 2006 - 09:29 UnknownUser Sequence diagram
wps_output_as_geoserver_wfs_layer.pngpng wps_output_as_geoserver_wfs_layer.png manage 20 K 14 Jun 2013 - 07:36 BenjaminPross  
Topic revision: r8 - 28 Jan 2014, EikeJuerrens
Legal Notice | Privacy Statement


This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Wiki? Send feedback